SECTION 6
THUNDERMAX ECM WITH INTEGRAL AUTO TUNE SYSTEM
  • ThunderMax ECM with Auto-Tune module mounts conveniently in place of the
  • factory ECM and plugs in to the existing harness
  • Utilizes wide-band O 2 sensors and works as a closed-loop control system to
  • continuously self-adjust and properly tune the motorcycle’s air/ fuel ratio for
    all riding conditions
  • Easy installation: replace the factory ECM, install new O 2 sensors and harness,
  • load the correct map for your bike, and ride
  • Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and
  • two wide-band sensors, TMax software and communication USB cable,
    Quick-Start Easy Install and Comprehensive User’s Manual, technical
    support and free software and updates
  • Hundreds of maps available to download for your bike (based
  • on model, engine size, exhaust system air cleaner, pistons,
    1020-2361
    cams, etc.) – load the map of your choice and the integral auto-
    1020-1851
    tune will do the rest
  • Improves throttle response, exhaust sound and driveability
  • Does not require dyno tuning
  • Rider can adjust idle speed, rev limit and speedometer calibration
  • Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
  • Works with all popular exhaust systems and is compatible with high-performance camshafts
  • Supports turbo, nitrous and supercharger applications
  • Software program allows live monitoring, recording and examination of diagnostic codes and
  • datalogs including number of starts, engine temperature and rpm operation
  • New maps, software, firmware updates, map analysis and tech support available online at no charge
  • Made in the U.S.A.
  • NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require
    modifications or relocation of their O 2 sensor port bungs.
    1022-0039
    P ART  #
    DESCRIPTION
    SUG. RETAIL
    1020-2664
    For 17-18 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLHTCUTG/ FLRT
    $989.95
    1020-2118 1
    For 14-16 FLHT/ FLHR/ FLHX/ FLTR models and 14-15 FLSTNSE models
    989.95 GASKETS
    1020-0836 1
    For 08-13 FLHT/ FLHR/ FLHX/ FLTR models and 09-13 H-D FL Trike
    989.95 & SEALS
    1020-2795
    For 18 FXST/ FLST models
    989.95
    1020-2360 1
    For 12-15 FXS/ FLS/ FLST models, 12-17 FXD/ FLD/ FXDWG models (except FXDLS) and 14-18 XL models
    899.95
    1020-1848
    For 11 FXS/ FLST models
    899.95
    1020-1851
    For 01-10 FXST/ FLST, 02-07 FLHT/ FLHR/ FLTR/ FLHX, 07-09 XL
    899.95
    1020-2361
    For 08-10 FXCW/C, 04-11 FXD/ FXDWG, 09 SE Softail, 10-13 XL models and 08-12 XR1200/X (includes mini USB pigtail)
    919.95
    1020-1853 1
    For 02-17 V-Rod models
    919.95
    1020-2382
    For 15-18 XG500/ 750 models
    899.95
    1022-0039
    Repl. 18mm oxygen sensor (ea.)
    117.95
    1 Will require the use of an exhaust system with 18mm sensor bungs or headpipes must be modified to accept 18mm sensors.
    THUNDERMAX 50 ECM
  • California ARB-compliant complete replacement engine-management system for Delphi ® -equipped
  • EFI model Harleys
  • Integral auto-tune system utilizes wide-band O 2 sensors and works as a closed-loop control system
  • to continuously self-adjust and properly tune the motorcycle’s air/fuel ratio in all conditions
  • Easy installation – replace the factory ECM, install new O 2 sensors and harness, and ride
  • Improves throttle response and increases horsepower and torque
  • Maintains excellent fuel economy
  • Includes Thundermax 50 ECM, plug-in harness, two wide-band O 2 sensors, software, communication
  • USB cable, comprehensive user’s manual, full technical support and free software updates
  • Software allows examination of vehicle diagnostic codes
  • 01-05 models will require the exhaust system to be equipped with or modified for O 2 sensor bungs
  • Made in the U.S.A.
  • NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require
    modifications or relocation of their O 2 sensor port bungs.
    C.A.R.B. EO #s D-644 01-06, K-001 08, K-001-1 09, K-001-2 10, K-001-3 08 NEW FAM.
    P ART  #
    DESCRIPTION
    SUG. RETAIL DASHES
    1020-0837
    For 01-05 Softail, 02-05 Touring models (88” engine only)
    $899.95 & GAUGES
    THUNDERMAX PIGTAIL HARNESS
  • Allows a second port for the communication cable connection
  • to the ThunderMax
  • It is installed to the bike’s wiring harness at the 36-pin ECM
  • connector (connection requires harness plug disassembly;
    two terminated wires are inserted into two unused ports in
    the 36-pin connector, and a ground wire added)
  • Handy for motorcycle models with tight clearances around the
  • ECM such as Dyna, Softail Rocker and 02-05 V-Rod models
  • Made in the U.S.A.
  • 1022-0059
    1020-1855
    NOTE: PART #1022-0059 requires ThunderMax ECM with serial number
    114000 or higher (produced beginning August 2008). Will not
    P ART  #
    DESCRIPTION
    SUG. RETAIL
    work on previous model ThunderMax PART #232661 TBW unit.
    1022-0059
    ThunderMax pigtail harness for V-Rod P ART  #1020-1853,
    NOTE: PART #1020-1855 requires ThunderMax ECM with Mini USB
    Gen II P ART  #s 1020-0323, 1020-1279, 1020-1311 and
    communication port (beginning November 2012). Will not
    AutoTune repl. module P ART  #1020-0322
    $18.95 & AXLES
    work on previous model ThunderMax ECM or PART #1020-0836
    1020-1855
    ThunderMax Mini USB pigtail for remote access to
    (Touring TBW units).
    modules P ART  #s 1020-1851, 1020-1852 and 1020-2361
    18.95
    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    SEE PAGE 396 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    583