SECTION 7
T111 LONG-BLOCK ENGINES
  • Super stock heads and crankcase
  • S&S easy start cams
  • High-flow oil pump
  • Forged flattop pistons
  • Intake system not included;
  • 0901-0204
    compatible with stock or
    aftermarket intake systems
  • 4 1 / 8 ” bore x 4 1 / 8 ” stroke
  • 9.8:1 compression ratio
  • Wrinkle black finish
  • NOTE: Oil line installation
    kit required.
    NOTE: Cylinder heads
    on T-Series long
    block engines are
    99-05 style. Owners of
    06 models will need to
    purchase a set of 99-05
    style, offset intake flanges.
    NOTE: Cylinder heads on these engines
    are specially machined to
    compensate for the non-stock
    cylinder length. As a result, they
    are compatible with manifolds
    0901-0198
    and throttle bodies with stock
    length intake runners. In
    addition, the breather vent bolt
    locations have been adjusted
    so they are in the stock
    location, so stock style
    aircleaner back plates will
    bolt up to these engines.
    PART #
    DESCRIPTION
    SUG. RETAIL
    0901-0204
    For 07-16 Touring models (except Twin Cooled)
    $5,994.95
    0901-0198
    For 99-06 Touring and 99-05 Dyna models
    5,744.95
    V80 LONG BLOCK ENGINE
  • Stock-height basic engine is direct bolt in replacement for aging
  • 80”  H-D Evolution engines
    V111 LONG BLOCK ENGINE
  • Does not include carb or ignition; use stock or aftermarket carburetor
  • +30% increase in HP and torque over stock
  • and air cleaner
  • Short stroke for less vibration and longer engine life
  • 508 cam
  • Shorter than stock engine height for easy installation
  • Forged rocker arms
  • Does not include carb or ignition; use stock or aftermarket carburetor
  • 585 valve springs
  • and air cleaner
  • Flat top cast pistons
  • High volume, high-pressure (HVHP) oil pump
  • S&S standard oil pump
  • Durable S&S 3-pc. flywheels
  • S&S performance replacement heads
  • Performance 585 cam & valve springs
  • 3 1 / 2 ” x 4 1 / 4 ” bore and stroke
  • 4 1 / 8 ” x 4 1 / 8 ” bore and stroke
  • 8.4:1 compression ratio
  • 9.8:1 compression ratio
  • Wrinkle black finish
  • Wrinkle black finish
  • PART #
    DESCRIPTION
    SUG. RETAIL PART #
    DESCRIPTION
    SUG. RETAIL
    0901-0187
    For 84-99  H-D Big Twin models w/ carb
    $4,150.95 0901-0197
    For 84-99  H-D Big Twin models w/ carb
    $4,999.95
    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    SEE PAGE 399 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    694