SECTION 7
HIGH PERFORMANCE LIFTERS
AUDIO •Tighter inner diameter grind provides substantial lower leak down
& VIDEO •Direct lubrication to axle and roller needle bearings
  • Allows you to use of higher spring pressure and increased
  • RPM capability
    PART #
    DESCRIPTION
    SUG. RETAIL
    0929-0062
    For 17-18 M-Eight, 99-17 Twin Cam, 00-18 XL, 09-13 XR
    $239.99
    SEATS &
    EXHAUST
    0929-0005
    0929-0017
    FUEL/AIR
    RACE SERIES ® SOLID LIFTERS
    SYSTEMS
    0929-0018
  • Designed for engines with radical valve spring pressures and
  • large lift camshafts; maintain proper and critical oil flow to top
    end with metered oiling
    ENGINE
    HP+ ® HYDRAULIC LIFTERS
  • Optimize valvetrain stability, increase engine rpm, horsepower
  • Performance hydraulic roller lifters dyno developed and track tested
  • and torque output
  • CNC-machined and precision ground
  • Decrease valve float; maintain maximum valve lift
  • When used with Feuling ® oil pump, they will increase critical oil flow to
  • Made from hardened steel, CNC-machined and precision-ground
  • Utilize standard pushrod seat height; Feuling recommends the
  • use of PART #0928-0010 Race Series ® adjustable pushrods (sold
  • Can also be used for OEM replacements
  • separately; see page 697)
  • Sold in a set of four
  • Recommended for both strip and high-performance street engines
  • GASKETS •Made in the U.S.A.
  • Sold in a set of four
  • Made in the U.S.A.
  • & SEALS NOTE: Requires removal of rocker covers and rocker arm supports for installation.
    P ART  #
    DESCRIPTION
    SUG. RETAIL
    NOTE: High volume oil pump recommended.
    0929-0005
    For 17-18 M-Eight, 99-17 Twin Cam,
    NOTE: Requires removal of rocker covers and rocker arm
    00-18 XL/XR 1200 and 00-09 Buell
    $159.95
    supports for installation.
    0929-0017
    For 91-99 XL and 94-99 Buell
    169.95 PART #
    DESCRIPTION
    SUG. RETAIL
    0929-0018
    For 86-90 XL
    209.95 0929-0024 For 99-17 Twin Cam, 00-18 XL/XR 1200, 00-09 Buell
    $269.95
    LIGHTING
  • Full-travel hydraulic lifters made from machined steel
  • Exceed the needs of large-lift camshafts and higher
  • 0929-0072
    CABLES spring pressures with a slower bleed-down rate
  • Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
  • Increase engine rpm and valvetrain stability; decreases valve float for maximum valve lift
  • 0929-0007
    0929-0022
  • Available in oversize diameters
  • BRAKES •Recommended for both strip and performance street engines
  • Sold in a set of four
  • Made in the U.S.A.
  • NOTE: High-volume oil pump recommended.
    TANKS &
    NOTE: Recommended for engines running higher than 185 lb. valve spring seat pressure.
    PART #
    DESCRIPTION
    SUG. RETAIL PART #
    DESCRIPTION
    SUG. RETAIL
    FOR 17-18 M-EIGHT
    FOR 99-17 TWIN CAM, 00-18 XL/XR 1200, 00-09 BUELL (CONT)
    DASHES 0929-0072 1
    Standard
    $289.95 0929-0008
    +.001”
    $269.95
    +.843”-.8435” oversize
    289.95 0929-0009
    +.0015”
    269.95
    0929-0074 1
    +.8345”-.844” oversize
    289.95 FOR 86-90 XL
    FOR 99-17 TWIN CAM, 00-18 XL/XR 1200, 00-09 BUELL
    0929-0022
    Standard
    269.95
    Standard
    269.95 1
    Must check clearance on front exhaust lifter to camshaft flange fit.
    POWERGLIDE II HYDRAULIC TAPPETS
  • These tappets have undergone extensive development to
  • FENDERS increase load, lubrication, hydraulic and life capacities
    0929-0014
  • Roller perpendicularity held to .0002”
  • Hand-honed hydraulic unit cavity
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • WHEELS •Made in the U.S.A.
    & AXLES FOR 17-18 M-EIGHT, 99-17 TWIN CAM, 00-18 XL/XR 1200 AND 00-09 BUELL
    PART #
    DESCRIPTION
    SUG. RETAIL PART #
    DESCRIPTION
    SUG. RETAIL
    Standard
    $118.95 0929-0023
    +.005” oversize
    $134.95
    COVERS & DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    GENERAL
    SEE PAGE 396 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    700