SECTION 7
AUDIO
V-THUNDER™ TAPPET ASSEMBLIES
  • Features an oil metering design that provides uniform metering throughout the entire rpm range
  • & VIDEO
    DS-194262
  • Rollers and axles are manufactured from high-carbon/chromium bearing-quality steel, which is through-hardened
  • for improved wear and load-carrying capability, and the pushrod seat is carbo-nitrided
  • Each unit is 100% tested for proper function
  • HIGH ENERGY™ hydraulic roller lifter is a performance replacement for the stock hydraulic roller lifter, which should be used for
  • PRO-MAGNUM™ hydraulic roller lifter is designed to perform at higher engine speeds, as in race applications, and a slight increase in noise
  • should be expected; unique anti-pump-up retainer is designed to replace the stock spring retainer clip, which precisely limits plunger travel
    SEATS & •HY-REV™ hydraulic roller lifter features internal hydraulic check valve, which allows for higher rpm
  • Made in the U.S.A.
  • PART #
    DESCRIPTION
    SUG. RETAIL
    HIGH ENERGY™ for 17-18 M-Eight, 99-17 Twin Cam, 00-18 XL/ XR1200 and 00-09 Buell models
    $21.95
    EXHAUST DS194328
    DS194329
    PRO-MAGNUM™ for 17-18 M-Eight, 99-17 Twin Cam, 00-18 XL/ XR1200 and 00-09 Buell models
    23.95
    DS-194262
    HY-REV™ for 91-99 XL and 94-99 Buell
    30.95
    FUEL/AIR
    SYSTEMS
    0929-0046
    0929-0015
    ENGINE
    0929-0043
    DS-194347
    POWERGLIDE™ STEADY ROLL TAPPETS
    hydraulics), but now incorporates a Steady Roll bronze bushing in place of the
    needle bearing roller
  • These tappets have undergone extensive development to increase load,
  • GASKETS
    lubrication, hydraulic and life capacities
    DS-194342
    & SEALS •Billet body
    HYDROSOLID TAPPETS
  • Increased roller width
  • Perform like a hydraulic tappet up to
  • Roller perpendicularity held to .0002”
  • 5500 rpm, then turn into a solid tappet
  • Hand-honed hydraulic unit cavity
  • When they turn into solid tappets, it adds approximately
  • Dynamic load capacities increased over 30%
  • three to six more usable horsepower
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Prevent hydraulic pump at high rpms
  • Lubrication capacities for the roller, cams and cam bearings have increased
  • Sold each
  • 100% for increased cooling
  • Made in the U.S.A.
  • LIGHTING •Sold each
    NOTE: Require the use of adjustable pushrods.
  • Made in the U.S.A.
  • P ART  #
    DESCRIPTION
    SUG. RETAIL
    P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL 0929-0015
    For 17-18 M-Eight, 99-17 Twin Cam,
    FOR 17-18 M-EIGHT, 99-17 TWIN CAM,
    FOR 86-90 XL AND 87-90 BUELL
    00-18 XL/XR, 1200 and 00-09 Buell
    $117.95
    $101.95 DS-194347
    For all 91-99 XL and 94-99 Buell models
    $120.95 0929-0044 +.002” oversize
    112.95
    (.9035” OD); repl. OEM  #18529-89
    112.95
    0929-0047 +.002” oversize
    150.95 0929-0045 +.005” oversize
    112.95 DS-194342
    For 86-90 XL (.8425” OD);
    0929-0048 +.005” oversize
    150.95
    repl. OEM  #18523-86
    110.95
    CABLES
    BIG AXLE™ POWERGLIDE™ TAPPETS
  • Micro-finish bore allows a running fit of .0002”
  • BRAKES •Big Axle™ rollers are designed around three working parts
  • The outer wheel/roller has a 27% greater wall size – less
  • harmonic distortion for better tracking of cam lobe
    DS-194278
  • Pin bearings are decreased in size by 12%, which increases rpm for more precise tracking
  • TANKS & •Axle size is increased 36% and doubles as the inner race, so the pin bearing and complete roller assembly now rotate
    DS-194107
  • Sold each
  • Made in the U.S.A.
  • DASHES P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL
    FOR 86-90 XL; REPL. OEM  #18523-86
    DS-194278
    Std. (.9035”)
    $103.95 DS-194107
    Std. (.8425”)
    $95.95
    FENDERS
    HYDRAULIC LIFTER
    LIMITED-TRAVEL SPACER
  • Spacers are designed to limit the range of
  • travel of the hydraulic tappet plunger
  • Sold in sets of four
  • HIGH-QUALITY TAPPET ROLLER KITS
  • Made in the U.S.A.
  • Made from 52100 bearing material
  • WHEELS NOTE: Requires the use of adjustable pushrods, see page 698
  • Include 4340 chromoly axles
  • & AXLES P ART  #
    DESCRIPTION
    SUG. RETAIL
  • Sold in a 4-pack
  • 0929-0006
    For 03-17 Twin Cam and S&S Evo-style
    P ART  #
    DESCRIPTION
    SUG. RETAIL
    lifters w/ .612” ID tappets
    $20.95 0929-0053
    For 86-90 XL
    $86.95
    COVERS & DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    GENERAL
    SEE PAGE 396 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    702