SECTION 7
0926-1467
ECONO BEEHIVE ® VALVE SPRING KITS
  • Made from premium stress-relieved conical ovate wire
  • Feature extremely high-level of fatigue life
  • Use a much smaller and lighter weight retainer to reduce valve weight and create
  • quicker rev and smoother motion
  • Designed to handle the demands of performance engines with .585” and
  • smaller lift camshafts
  • Available for 5 / 16 ” and 7mm valves
  • Kits include: Econo BeeHive ® valve springs, lightweight 7° steel retainers, machined
  • heat-treated chromoly spring seats, seat shims, valve locks and a set of premium
    Viton ® valve seals equipped with spring-loaded valve stem wiper system
  • Seat lbs./ installed height; 183  lbs. at 1.770” (0.510” lift), 175  lbs. at 1.795” (0.535” lift),
  • 172  lbs. at 1.813” (0.553” lift), 165  lbs. at 1.835” (0.574” lift), 160  lbs. at 1.845” (0.585” lift),
    380  lbs. at 1.260” OPEN HEIGHT coil bind at 1.190”
  • Dyno proven and track tested
  • Feuling ® BeeHive ® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
  • Made in the U.S.A.
  • NOTE: Econo BeeHive ® kits are direct replacement with no machining or rocker box clearance required for cams up to .574” lift for 84-04 Big Twin SYSTEMS
    and 86-03 XL and up to .585” lift for 05-17 Twin Cam.
    PART #
    DESCRIPTION
    SUG. RETAIL PART #
    DESCRIPTION
    SUG. RETAIL
    FOR 05-17 88”/96”/ 103” TWIN CAM, 04-17 XL, 09-12 XR 1200
    FOR 84-04 BIG TWIN AND 86-03 XL
    0926-1468 7°, 7mm valve stem w/ stock triple keeper groove
    $199.95 0926-1467 7°, 5 / 16 valve stem w/ stock keeper groove
    $199.95
    ENDURANCE BEEHIVE ® VALVE SPRINGS WITH TITANIUM RETAINERS
  • Machined from premium-grade hi-tensile chrome silicon single-conical ovate wire
  • Shot-peened with specially processed thermal heat treat and super NexTex ® finish for
  • 0926-1466
    fatigue life needed to exceed high demands of V-Twin engines
  • Use a much smaller and lighter weight retainer to reduce valve weight and create
  • quicker rev and smoother motion
  • Direct bolt-in replacement up to .650” cam lift; no machining or rocker box
  • clearancing required
  • Available for 5 / 16 ” and 7mm valves
  • Kits include: Endurance BeeHive ® valve springs, lightweight 7° super Titanium heat-
  • treated retainers, machined spring seats, seat shims, valve locks and a set of premium
    Viton ® valve seals equipped with spring-loaded valve stem wiper system
  • Seat lbs./ installed height; 198  lbs. at 1.685” (.535” lift), 194  lbs. at 1.703” (.553” lift), 190  lbs.
  • at 1.724” (.574” lift), 187  lbs. at 1.754” (.604” lift), 185  lbs. at 1.780” (.630” lift), 160  lbs. at
    1.800” (.650” lift), 375  lbs. at 1.150” (open height) coil bind at 1.100”
  • Feuling ® BeeHive ® valve springs must be installed at the correct OPEN HEIGHT, matching
  • max lift to the open height spec of the valve springs
  • Made in the U.S.A.
  • NOTE: Feuling ® BeeHive ® valve spring kits are direct replacement with no machining
    or rocker box clearance required up to .574” lift for 84-04 Big Twin and 86-03 XL and up to .650” lift for 05-17 Twin Cam. Larger camshafts
    require valve guide machining for seal to retainer clearance.
    PART #
    DESCRIPTION
    SUG. RETAIL PART #
    DESCRIPTION
    SUG. RETAIL
    FOR 05-17 88”/96”/ 103” TWIN CAM, 04-17 XL, 09-12 XR 1200
    FOR TWIN CAM SCREAMIN’ EAGLE HEADS
    0926-0852 7°, 7mm valve stem w/ stock triple keeper groove
    $299.95 0926-1466 5 / 16 valve stem and keeper groove and
    FOR 84-04 BIG TWIN AND 86-03 XL
    .530”  diameter valve guides
    $299.95
    0926-0851 7°, standard 5 / 16 valve stem and keeper groove
    299.95
    HIGH-LOAD BEEHIVE ® VALVE SPRINGS WITH TITANIUM RETAINERS
    0926-1469
  • Made from premium stress-relieved conical ovate wire with nitrided surface heat
  • treatment, shot-peened surface enhancements and Nano Peen™ polish
  • Feature extremely high level of fatigue life
  • Use a much smaller and lighter weight retainer to reduce valve weight and create
  • quicker rev and smoother motion
  • Designed to handle the highest demands of performance engines with high-lift,
  • steep-ramped camshafts
  • Allow up to .750” lift cams; no rocker box clearancing required
  • Available for 5 / 16 ” and 7mm valves
  • Kits include: High-Load BeeHive ® valve springs, lightweight 10° Titanium retainers
  • manufactured from Ti-17 alloy and micropolished for enhanced fatigue life, machined
    heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton ®
    valve seals equipped with spring-loaded valve stem wiper system
  • Seat lbs./ installed height; 217  lbs. at 1.789” (.574” lift), 215  lbs. at 1.800” (.585” lift), 208  lbs.
  • at 1.819” (.604” lift), 200  lbs. at 1.845” (.630” lift), 185  lbs. at 1.900” (.685” lift), 170  lbs. at
    1.935” (.720” lift), 415  lbs. at 1.215” (open height) coil bind at 1.125”
  • Dyno proven and track tested
  • Feuling ® BeeHive ® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
  • Made in the U.S.A.
  • NOTE: Feuling ® BeeHive ® valve spring kits are direct replacement with no machining or rocker box clearance required up to .574” lift for 84-04 Big
    Twin and 86-03 XL and up to .700” lift for 05-17 Twin Cam. Larger camshafts require valve guide machining for seal-to-retainer clearance.
    PART #
    DESCRIPTION
    SUG. RETAIL PART #
    DESCRIPTION
    SUG. RETAIL
    FOR 05-17 88”/96”/ 103” TWIN CAM, 04-17 XL, 09-12 XR 1200
    FOR TWIN CAM W/ SCREAMIN’ EAGLE HEADS
    0926-0854 7°, 7mm valve stem with stock triple keeper groove
    $319.95 0926-1469 5 / 16 valve stem and keeper groove and
    FOR 84-04 BIG TWIN AND 86-03 XL
    .530”  diameter valve guides
    $319.95
    0926-0853 10°, standard 5 / 16 valve stem and keeper groove
    319.95
    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    SEE PAGE 399 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    723