SECTION 7
DS-194107
DS-194362
BIG AXLE™ POWERGLIDE™ TAPPETS
0929-0040
  • Micro-finish bore allows a running fit of .0002”
  • Big Axle™ rollers are designed around three working parts
  • The outer wheel/ roller has a 27% greater wall size – less harmonic
  • distortion for better tracking of cam lobe
    PREMIUM HIGH-PERFORMANCE TAPPETS
  • Reduced valve train noise from startup to shutdown
  • Pin bearings are decreased in size by 12%, which increases rpm for
  • Close tolerance for low leak-down rates – fast pump-up and superior
  • more precise tracking
    high rpm performance
  • Axle size is increased 36% and doubles as the inner race, so the pin
  • Low mass, bearing grade, silicon nitride check ball and lighter check
  • bearing and complete roller assembly now rotate around the axle
    ball spring – enhances fast pump-up and quiet operation
    instead of an inner race, eliminating all possible movement in and
  • 100% tested to ensure that leak down and top end oil flow are
  • around the axle
    within specification
  • Sold each
  • Available with or without the S&S HL 2 T limited travel kit
  • Made in the U.S.A.
  • Sold in sets of four
  • P ART  #
    SIZE
    SUG. RETAIL •Made in the U.S.A.
    FOR 84-99 80” EVOLUTION; REPL. OEM  #18523-86
    PART #
    DESCRIPTION
    SUG.RETAIL
    DS-194107
    Std. (.8425”)
    $95.95
    FOR 17 M-EIGHT, 99-17 TWIN CAM, 00-17 XL MODELS
    DS-194362
    +.002”
    108.95
    0929-0040
    W/ HL 2 T kit
    $289.95
    FOR 91-99 XL, 94-99 BUELL; REPL. OEM  #18526-89
    0929-0041
    W/o HL 2 T kit
    269.95
    DS-194278
    Std. (.9035”)
    103.95
    FOR 86-90 XL; REPL. OEM  #18523-86
    DS-194107
    Std. (.8425”)
    95.95
    DS-194362
    +.002”
    108.95
    0929-0004
    HYDRAULIC TAPPETS
  • Rollers have a larger-than-stock inner bearing race that reduces stress
  • and increases axle life
  • Each lifter body and plunger assembly is hand-fit and pressure-tested
  • to ensure correct operation
  • Redesigned plunger assembly withstands forces associated with
  • heavy-duty valve springs and pushrods typically used in high-
    HIGH-PERFORMANCE
    performance applications
    TAPPETS
  • Revised metering device precisely controls oil delivery to top end,
  • Great choice for any stock or high-performance application
  • ensuring rapid lifter pump-up and reducing possibility of oil starvation
  • Only the finest materials and precision machining techniques are used
  • to bottom end
    in the manufacture of these lifters, and strict quality control ensures
  • Tappets that include the HL 2 T Limited Travel Kit improve cold starts
  • they will work flawlessly every time, no matter what the application
    and high rpm valve timing accuracy
  • HL 2 T kit not included
  • Sold in sets of four
  • Sold in sets of four
  • PART #
    DESCRIPTION
    SUG.RETAIL
  • Made in the U.S.A.
  • FOR 84-99 EVOLUTION BIG TWIN AND 86-90 XL MODELS
    P ART  #
    DESCRIPTION
    SUG. RETAIL 0929-0061
    W/ HL 2 T kit
    $286.95
    0929-0042
    For 17 M-Eight, 99-17 Twin Cam, 00-17 XL models
    $129.95 0929-0004
    W/o HL 2 T kit
    266.95
    HYDRAULIC TAPPET ASSEMBLIES
  • Features precision-hardened ball-type check valve to provide superior sealing and
  • lash control
  • Valve seal is self-cleaning, making it less susceptible to noise caused by oil contamination
  • Lifter body and roller are heat-treated for improved strength and wear resistance
  • Plunger is precision-ground and select-fitted to a tolerance in the millionths-of-an-inch
  • for quieter operation
  • Made in the U.S.A.
  • P ART  #
    DESCRIPTION
    SUG. RETAIL
  • PART #0929-0054 sold each, PART #0929-0055 sold as a set of 4
  • 0929-0055
    For 91-99 XL and 94-99 Buell (set of 4)
    $119.95
    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    SEE PAGE 399 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    730