SECTION 7
AUDIO
& VIDEO
SEATS &
RACE SERIES ®
OIL PUMPS FOR TWIN CAM
  • 7075 billet aluminum with military spec hard
  • EXHAUST anodized, blue printed and designed for the racer
    0932-0026
    0932-0020
  • The 7075 alloy is 50% harder and stronger than 6061 aluminum
  • and holds tighter tolerance under temperature
  • More pressure volume and more oil pressure
  • FUEL/AIR •More scavenge volume eliminating power robbing wet sumping, blowby and oily air cleaners
    SYSTEMS •Cooler oil and engine temperatures
  • More horsepower, more torque, more oil pressure, more return volume
  • High Flow 2” Chrome Moly gerotor gears
  • ENGINE 4 ft./lb. of torque gain to the rear wheel
  • When combined with the Feuling High Flow camplate, test results show 3 horsepower gain and
  • Stock replacement for Twin Cam engines, recommended for both strip
  • and performance street engines
    PART #
    DESCRIPTION
    SUG. RETAIL
    0932-0026 For 07-17 Twin Cam and 06 Dyna Glide models
    $499.95
    0932-0020 For 99-06 Twin Cam models (except 06 Dyna Glide)
    499.95
    GASKETS
    & SEALS
    OE+ OIL PUMP FOR M-EIGHT
  • Precision-machined pressure relief valve and bore
  • LIGHTING •Every pump is bench tested, the relief valve is seated and sealed to a
    minimum of 30 psi with full pop off at 55-60 psi
  • Increased oil volume from the larger gears and properly sized passages along with the pressure
  • Eliminate common pressure and scavenge issues associated with the factory oil pumps
  • When matched to a Feuling camplate, pumps reduce engine and oil temperatures, increase oil pressure
  • Increase oil flow in and out of the engine with corrected tolerances, oil passages and larger geroter gears
  • High-flow 2.250” Chrome Moly gerotor gears
  • CABLES •20% more pressure and 20% more scavenge volume over stock
  • Magnet to help protect gears and pressure relief valve
  • Billet 6061 aluminum with a natural finish
  • Increases oil pressure
  • BRAKES •Eliminates blowby and wet sumping
  • Cooler oil and engine temperatures
  • OE+ oil pump is stock replacement
  • P ART  #
    DESCRIPTION
    SUG. RETAIL
  • Made in the U.S.A.
  • 0932-0194
    For 17-18 M-Eight
    $339.95
    TANKS &
    DASHES
    OE+ OIL PUMPS FOR TWIN CAM
    FENDERS •OE+ stock replacement billet oil pumps deliver increased oil pressure
  • Upgraded alternative to stock components
  • Designed and manufactured to the highest standard of quality with
  • proven Feuling performance
    0932-0090
  • 2” Chrome Moly gerotor gears
  • Stock replacement
  • WHEELS •99-06 PART #0932-0089: 18% more pressure volume over stock 38%
    more scavenge volume over stock
    & AXLES
  • 07-17 PART #0932-0090: 10% more pressure volume over stock 16%
  • PART #
    DESCRIPTION
    SUG. RETAIL
    more scavenge volume over stock
    0932-0090
    For 06 Dyna and 07-17 Twin Cam models
    $239.95
    0932-0089
    For 99-06 Twin Cam models (except 06 Dyna)
    239.95
    COVERS & DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    GENERAL
    SEE PAGE 396 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    736