SECTION 7
0932-0092
0932-0093
0932-0094
OE+ OIL PUMP/ CAM PLATE KITS
Kits are an upgrade to the stock oiling system, delivering
increased oil pressure and return scavenge volumes from
an OE+ billet oil pump and matched OE+ billet cam plate
(see OE+ oil pumps for complete specs)
OE+ billet cam plates have increased rigidity and are
machined to tighter tolerances compared to stock
OE+ cam plate pressure relief valve and spring are pre-
set, matched and seated by FEULING ® with a full pop-off
pressure of 50-60 psi.
Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
OIL PUMP/ CAM PLATE KITS
0932-0093 1
For gear or chain drive cams in 06 Dyna and all 07-17 Twin Cam motors
$479.95
0932-0091
For gear drive cams in 99-06 Twin Cam motors (except 06 Dyna)
479.95
0932-0092 2
For chain drive cams in 99-06 Twin Cam motors (except 06 Dyna)
499.95
CONVERSION KIT
0932-0094 3
For chain drive cams in 99-06 Twin Cam motors (except 06 Dyna)
479.95
1 Block-off plate PART #0932-0036 required when using gear drive cams.
2 Includes tensioner pins and guide hardware.
3 Conversion camplates use 99-06 style camshafts, oil system pack requires separate purchase of hydraulic chain drive tensioners, chains, sprockets
and spacers.
0932-0111
0932-0110
TC3 OIL PUMP AND CAM SUPPORT PLATE KITS
Precision CNC machined forged aluminum
Increased structural strength
Dimensional stability
Freedom for internal porosity
Separate scavenge sections for flywheel cavity and cam chest scavenge each area more efficiently with no interference
Gerotors are designed to tolerate more pinion shaft runout without damage
Cam chest pic up features a magnetic trap to protect scavenge rotors from metal debris
Both scavenge rotors are protected from debris, the most common cause of stock oil pump failure
Passage plugs are removable for service
Bronze pinion shaft bushing in all models and bronze cam bushings in 07-17 style can be replaced
Adjustable oil pressure regulator – adjust without removing plate from engine
99-06 cam support plate is designed to use late style hydraulic cam chain tensioners
Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
0932-0111 For 07-17 Big Twin and 06 Dyna models
$674.95
0932-0110 For 99-06 Big Twin models (except 06 Dyna models)
$674.95
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
SEE PAGE 399 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
756