SECTION 7
0932-0027
0932-0028
0932-0035
0932-0069
0932-0071
OIL SYSTEM PACK
0932-0072
  • Combine all the needed components to finish your T/C ® engine’s oiling system
  • Available in either HP+ ® or Race Series ® kits
  • These kits increase oil pressure, oil volume, engine oil flow and return oil scavenging, eliminating wet sumping and oily air cleaners; test results
  • show 25-35 degree cooler engine temperatures, 15-30 degree cooler oil temperatures, 15-30 more lbs of oil pressure and quieter smoother
    engine operation; results also show a substantial increase of oil pressure and 3  H.P. and 4  ft/ lbs. of torque to the rear wheel
  • Both HP+ ® and Race Series ® kits include Feuling’s ® HIGH FLOW billet cam plate made from 7075 aluminum which is 50% harder and stronger than
  • the factory, SE ® and other aftermarket cam plates; Feuling ® increases oil flow and volume by enlarging the oil pump reservoirs and critical oil
    passages including matching the oil port holes throughout the cam plate to the port holes in the engine case which increases engine oil flow to
    the lifters, piston cooling jets, crankshaft and rod bearings
  • HP+ ® Series kits include a billet 6061 aluminum high-volume oil pump, Feuling ® HIGH FLOW cam plate, HP+ ® Hydraulic roller lifters, gaskets and
  • o-ring kit
  • Race Series ® kits include a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances
  • under temperature; Race Series ® hydraulic lifters have a full .200” of total travel designed with a slower bleed-down rate to handle heavy valve
    spring pressures, increase engine RPM before valve float and feature increased roller clearance for steep-ramped camshafts; kits include a Race
    Series ® oil pump, Race Series ® lifters, high flow cam plate, gaskets and o-rings
  • Conversion cam plate kits PART #s 0932-0071 and 0932-0072 utilize the early-style 99-06 camshafts and upgrade the cam chain system to use the
  • late-style 07-17 hydraulic tensioner system; ‘factory’ sprockets, tensioners, chain and hardware sold separately
    NOTE: 99-01 models with Magneti Marelli ignition require rear cam sprocket PART #0925-0147.
    PART #
    DESCRIPTION
    SUG. RETAIL PART #
    DESCRIPTION
    SUG. RETAIL & LICENSE
    FOR 07-17 TWIN CAM AND 06 DYNA WITH GEAR OR CHAIN DRIVE
    FOR 99-06 TWIN CAM WITH CHAIN DRIVE (EXCEPT 06 DYNA) CONVERSION
    0932-0029 1
    HP+ Performance pack
    $799.95 CAMPLATES UPGRADE TO 07-17 HYDRAULIC TENSIONERS
    0932-0030 1
    Race series
    999.95 0932-0071 4
    HP+ conversion cam plate
    $799.95
    FOR 99-06 TWIN CAM WITH GEAR DRIVEN CAMS (EXCEPT 06 DYNA)
    0932-0072 4
    Race series conversion cam plate
    999.95 FOOTRESTS
    0932-0027 2
    HP+ Performance pack
    799.95 1
    Gear Drive cam systems require block-off plate kit PART #0932-0036.
    0932-0028 2
    Race series
    999.95 2 Includes bearing retainer plate and hardware.
    0932-0035 3
    Chain drive conversion kit
    56.95 3 For use with PART #s 0932-0027 and 0932-0028 when using 99-06 chain
    FOR 99-06 TWIN CAM (EXCEPT 06 DYNA)
    drive system.
    WITH CHAIN DRIVE STOCK REPLACEMENT
    4 Conversion camplates use 99-06 style camshafts, oil system pack requires
    0932-0069 2
    HP+ Performance pack
    839.95
    separate purchase of hydraulic chain drive tensioners, chains, sprockets
    and spacers.
    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    SEE PAGE 399 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    763