SECTION 10
2104-0266
2104-0267
2104-0268
2104-0269
CLOTH SPARK PLUG WIRE SETS
  • These plug wires are cotton-braided and
  • lacquered, but have a modern stranded
    2104-0271
    copper conductor with PVC insulation for
    2104-0270
    top performance
    2104-0281
  • Each set consists of a full 48” of 7mm plug
  • wire with the Rajah clips for your spark plugs, a pair of rubber boots and a pair of high-tension terminals for the ends of the wires
  • Simply clip the wire to the needed length, put the boots and terminals on the end and install on your coil or magneto
  • Because these are not suppressor core wire, you could have radio interference on bikes that are running electronic ignitions
  • Made in the U.S.A.
  • P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL ENGINE
    2104-0266
    Red w/ black and yellow tracers
    $29.95 2104-0270
    Green w/ yellow tracers
    $29.95
    2104-0267
    Oak w/ red and black tracers
    29.95 2104-0271
    Satin black
    29.95
    2104-0268
    Yellow w/ black and red tracers
    29.95 2104-0281
    Black w/ orange tracers
    29.95
    2104-0269
    Black w/ red tracers
    29.95
    SPARK PLUG TERMINAL NUTS AND RING TERMINALS
  • These brass spark plug terminal nuts will fit any modern spark plug with
  • a removable top nut (Drag Specialties, NGK, Champion and any other major brand)
  • Also included are nickel-plated Rajah ring terminals
  • Add some vintage flair to your stock bike or your custom bobber or chopper
  • These are a screw-on style; strip the end of your plug wire, insert and screw the terminal on
  • The ring terminal is held in place firmly with the brass spark plug nut
  • Includes two brass nuts and two Rajah ring terminals
  • Made in the U.S.A.
  • P ART  #
    DESCRIPTION
    SUG. RETAIL
    2104-0263
    Brass spark plug terminal nuts and nickel-plated ring terminals
    $12.95
    FLASHING SPARK PLUG CAPS
  • Fit 10mm, 12mm and 14mm plugs with terminal nuts
  • Accept 7mm or 8mm plug wires
  • DS-305013
  • For terminal nut style plugs
  • DS-305007
  • Sold each
  • DS-305010
    NOTE: Not for use on fuel-injected models.
    P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL
    DS-305006
    90° bend, blue
    $9.95 DS-305010
    Straight, red
    $9.95 DS-305012
    120° bend, red
    $9.95
    DS-305007
    90° bend, red
    9.95 DS-305011
    Straight, blue
    9.95 DS-305013
    120° bend, blue
    9.95 BRAKES
    8.8MM PLUG-WIRE SEPARATOR
  • Chrome billet T-6 aluminum
  • Holds wires apart for a clean look
  • Sold each
  • Made in the U.S.A.
  • P ART  #
    DESCRIPTION
    SUG. RETAIL DASHES
    2107-2578
    8.8mm plug-wire separator
    $27.95 & GAUGES
    CHROME SPARK
    PLUG HOLDER
  • A chrome-plated replica of the
  • spark plug holder found on early
    Panheads, updated to accept
    even late-model Shovelhead
    deep-reach plugs
  • Metal holder clamps onto the rear
  • frame tube behind the oil tank on all Big Twin models
    SPARK PLUG CADDY
    and holds two extra spark plugs (not supplied)
  • Dual-plug caddy holds two
  • Held in place by a thumbscrew
  • 14mm spark plugs securely in place
    P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL
    DS-196091
    Chrome spark plug holder
    $21.95 2870368
    Spark plug caddy
    $3.95
    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    SEE PAGE 396 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    885