SECTION 10
BATTERY PADS
  • 1/8” low-density neoprene with pressure sensitive, removable liner on
  • one side that exposes the adhesive for contact
  • Pad is oversized so it can be trimmed into a top or bottom pad to fit
  • BATTERY PADS
    all applications
  • Top-quality pads absorb vibration and retain their shape
  • Can be cut into irregular shapes for anti-vibration padding,
  • Available in bottom style
  • seat bottoms, dash panels, etc.
  • Made in the U.S.A.
  • Sold in 5-pk.
  • Sold in 10-pack
  • Measures 5” x 8”
  • P ART  #
    DESCRIPTION
    SUG. RETAIL (EA.)
    P ART  #
    DESCRIPTION
    SUG. RETAIL (EA.)
    DS-174935
    For 86-96 XL (6.5” L x 3.875” W);
    2113-0077
    Battery pad
    $2.95
    repl. OEM  #66103-74A
    $4.95
    2212-0029
    2212-0030
    LED BATTERY GAUGES
  • Lets you know if your motorcycle’s charging
  • system is working with just a glance
  • Green LED indicates normal operating range
  • of 12.5 to 14.5V
  • Amber LED warns the bike is not charging
  • If reading drops below 10V or exceeds 15V,
  • flashing red LED alerts the rider
  • Simple two-wire connection
  • Gauge measures approximately 2” L x 3 / 4 ” W x
  • 3 / 16 H; daylight sensor automatically adjusts
    LED brightness
    P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL
    2212-0029
    Black
    $44.99 2212-0030
    Chrome
    $44.99 ELECTRICAL
    VOLTAGE MONITOR
  • Allows the user to track
  • battery voltage
  • Primary use is determining when
  • to recharge a battery in a total loss
    application; commonly found in
    BATTERY ELIMINATOR
    drag racing
  • Boosts spark voltage at cranking; eliminates
  • When the green light is on, the
  • flickering lights at low engine speed
    battery is fully charged; when the
  • Designed for use on generator models
  • amber light is on, there is still sufficient voltage to operate the ignition and other accessories;
    only, this kit comes complete with
    when the red light is on, the battery should be charged as soon as possible
    a shock-resistant mounting clamp and
  • Measures 1 5 / 8 ” L x 1 1 / 8 ” W x 1 / 2 ” H
  • attachment hardware
  • Made in the U.S.A.
  • Made in the U.S.A.
  • P ART  #
    DESCRIPTION
    SUG. RETAIL P ART  #
    DESCRIPTION
    SUG. RETAIL
    DVM-1
    Dyna voltage monitor
    $54.95 151308
    Battery eliminator
    $47.60
    CHARGE MONITOR
  • Allows user to track electrical system voltage on any vehicle with a normal 12V charging system
  • When the “normal” green light is on, the system voltage is normal and the battery is being
  • charged correctly; if the “high” red light is on, the system voltage is too high and damage to
    the battery may result; when the “low” red light is on, the system voltage is too low and the
    battery is being discharged
  • The above indications are only valid with the engine running
  • Measures 1 5 / 8 ” L x 1” W x 1 / 2 ” H
  • P ART  #
    DESCRIPTION
    SUG. RETAIL
  • Made in the U.S.A.
  • OCM-1
    Dyna charge monitor
    $54.95 HARDWARE,
    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
    SEE PAGE 396 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION.
    929