Warning: file(http://partsland.com/GiveNumber.cgi?GiveNumber=yes): failed to open stream: No connection could be made because the target machine actively refused it. in C:\USZ\www\PartsUnlimited\Off-Road\page_215.php on line 13 Parts Unlimited OFFROAD 2018
HANDLEBARS & CONTROLS
THROTTLE CAM SYSTEMS
  • Give the rider better control, no matter what the ground condition
  • Throttle cam system alters the ratio between hand-throttle rotation and opening
  • of the carburetor, which improves the rider’s control over the bike where it
    matters most, in the turns
  • System includes a 6061 billet aluminum throttle tube with a knurled surface and
  • three machined Delrin cams
  • Delrin bushings in both ends of the tube eliminate all aluminum-to-aluminum
  • contact to give the feeling of a ball-bearing tube without rust or freeze-up
  • Each included cam is designed with track conditions in mind; one for perfect, one
  • for intermediate and one for slippery or highly technical conditions
  • One cam is stock diameter, the other two have different ramped shapes, which
  • means the rider will turn their hand slightly farther to open the carburetor while
    in the zero to half-throttle range; the ramped shape ensures full throttle within
    a quarter turn
  • Changing cams is easily achieved in less than a minute
  • Throttle tube has removable end cap to allow installation of handguard
  • SUG. RETAIL ............................................................ $109.95 BODY
  • See chart on page 216 for available throttle systems
  • NOTE: Cams may not have anodized color.
    PART #
    0632-0399
    ALUMINUM THROTTLE TUBE
  • Most technically advanced aluminum replacement throttle
  • tube available
  • Two-piece design allows rider to easily change cam ratio for different
  • QUICK-TURN THROTTLE TUBES
    riding conditions
  • Throttle tube with larger-than-stock pulley causes throttle to
  • Machined 6061 billet aluminum construction with knurled surface
  • open faster
  • Delrin bushings in both ends of the tube eliminate all aluminum-to-
  • Less turn equals less elbow drop and a better riding position
  • aluminum contact to give the feeling of a ball-bearing tube without
  • 6061 billet aluminum construction with knurled surface and machined
  • rust or freeze-up
    Delrin cam
  • End cap is removable for handguard or bar end installation
  • Delrin bushings in both ends of the tube eliminate all aluminum-to-
  • See chart on page 216 for available parts/ fitments
  • aluminum contact to give the feeling of a ball-bearing tube without
  • Made in the U.S.A.
  • rust or freeze-up
  • Installs into stock housing; no modifications required
  • SUG. RETAIL ............................................................... $69.95 •End cap is removable for handguard or bar end installation
  • See chart on page 216 for available parts/ fitments and prices
  • HUSQVARNA/ KTM 2-STROKE THROTTLE TUBE
  • Made in the U.S.A.
  • SUG. RETAIL ............................................................... $39.95 SUG. RETAIL ............................................................... $69.95
    PART #
    0632-0802 PART #
    0632-0394 ELECTRICAL
    TAMER THROTTLE TUBES
  • Even out the abrupt initial power delivery to increase control
  • JIMMY TWISTER
    and traction
    THROTTLE BEARING SYSTEM
  • Introduce a non-linear ratio between hand throttle and the carb or
  • Delivers the smoothest possible throttle action with virtually no play
  • throttle body opening
  • Fits all G2 Ergonomics Throttle Control System throttle tubes
  • Throttle cam’s radius is reduced initially, which requires the rider to
  • Machined, anodized 6061 aluminum
  • rotate the throttle slightly further to get the same opening position as
  • System inserts into the handlebar end and two small roller bearings
  • stock; the radius increases after half-throttle to keep the full throttle
    allow a shaft (that attaches to the throttle tube) to spin freely
    position at or near stock
  • A thrust washer bearing keeps the throttle tube from jamming into the
  • Include a machined Delrin cam and a billet aluminum throttle tube with
  • handlebar during a right-side impact
    a knurled surface
  • Fits all aluminum handlebars; will not work with Enduro-
  • Removable end cap allows easy handguard installation
  • style handguards
  • See chart on page 216 for available parts/ fitments
  • Made in the U.S.A.
  • SUG. RETAIL ............................................................... $39.95 INDEX
    SUG. RETAIL ............................................................... $69.95 PART #
    0632-0524
    2018 PARTS UNLIMITED OFFROAD