V-TWIN TOOLS
TWIN SCAN COMPLETE KIT
  • Complete tuning and diagnostic solution
  • Communicates with ECM and BCM to read, then clear diagnostic trouble codes
  • Activates ABS solenoids for proper brake bleeding and testing
  • Ideal tuning aid for Screamin’ Eagle Pro Super Tuner (SEST), Dynojet Power Commander
  • (PC) and Twin Tec Twin Tuner
  • Includes all features of the standard Twin Scan units
  • Real-time display of engine sensors along with built-in data logging with capability to
  • store data for up to one hour
  • Included PC software analyzes logged data, then displays front and rear cylinder AFR
  • with the required volumetric efficiency (VE) using the same RPM rows and TPS/ MAP
    columns used in the Super Tuner tables
  • Includes two analog inputs with 0-20V or ±200V range as well as two channel
  • oscilloscope capability for waveform display
  • Analog inputs can also be used for air/ flow ratio (AFR)
  • Requires use of a PC with Windows 7, Windows 8 or Windows 10 for display
  • Includes WEGO IIID interface, two Bosch LSU 4.2 wide-band oxygen sensors,
  • two 18mm x 1.5 weld nuts, two 18mm x 1.5 hex socket plugs, USB cable,
    Twin Scan 3 probe kit and CD-ROM with software
  • Made in the U.S.A.
  • NOTE: See page 572 of 2018 FatBook for replacement weld nuts to mount O 2 sensors.
    P ART  #
    DESCRIPTION
    SUG. RETAIL
    3807-0251
    For 11-16 models with CAN bus, 01-16 36-pin Delphi fuel-injected and 04-06 carbureted models w/ 12-pin module
    $1,312.00
    3807-0249
    3807-0206
    TWIN SCAN DIAGNOSTIC KITS
  • Communicates with ECM, TSSM and BCM to read, then clear diagnostic trouble codes
  • Activate ABS solenoids for proper brake bleeding and testing
  • Real time display of engine sensors along with built in data logging will store data for up to one hour
  • Data logging automatically triggered when a trouble code is set and shows the data before and after
  • code is set
  • PART #3807-0249 includes two analog inputs with 0-20V or ± 200V range as well as two channel
  • oscilloscope capability for waveform display
  • Analog inputs can also be used for air/ flow ratio (AFR)
  • Easy to navigate software
  • Requires use of a PC with Windows 7, Windows 8 or Windows 10 for display
  • Use probe kit PART #3807-0189 to use scopemeter function; includes two insulation-piercing probes and
  • 12V power adapters
  • Use PART #1022-0008 for replacement Bosch O 2 sensor (sold each)
  • Made in the U.S.A.
  • 3807-0189
    NOTE: Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system
    for use with the Twin Scan 3+ kit 18mm oxygen sensors.
    P ART  #
    DESCRIPTION
    SUG. RETAIL
    3807-0249
    For 11-16 models w/ CAN data Bus
    $464.00
    3807-0206
    For 01-13 models including V-Rod and 08-13 touring models w/ 36-pin Delph fuel-injection system
    (except 11-13 Softail and 12-13 Dyna models) and 03-06 carbureted models w/ 12-pin module
    464.00
    3807-0189
    Twin Scan 3 Probe Kit
    94.00
    WEGO III WIDE-BAND AFR
    (AIR/ FUEL/ RATIO) MONITORING TOOL
  • Professional air/ fuel ratio system with built in data logging
  • Versatile tuning aid for carbureted and fuel injection engines; suitable for on-road and
  • dyno tuning
  • Highly accurate with less than +/- 0.10 AFR error over 10.3-19.5 AFR range using Bosch LSU
  • 4.2 5 wire wide band oxygen sensor(s)
  • Easy free air calibration procedure corrects for effects created due to sensor aging
  • 0-5V analog AFR output for interface to dyno instrumentation; easily interfaced to all
  • leading dyno systems
  • Waterproof with ultra-bright daylight readable blue display features automatic
  • 1022-0110
    dimming function
  • 11-16V DC supply voltage needed for operation; current drain is approximately 1 amp
  • Built in USB interface
  • Data logging software needs a PC or laptop with Windows 7/8/10; data can also be exported to an Excel spreadsheet for further analysis
  • Compact size: 4” L x 2” W x .5” H
  • Includes WEGO III Wide Band Exhaust Gas O 2 Sensor Interface, 42” harness, Bosch O 2 Sensor(s), 18mm x 1.5 weld nut(s) for sensor mounting
  • and software
  • Use PART #1022-0008 for replacement Bosch O 2 sensor (sold each)
  • Made in the U.S.A.
  • P ART  #
    DESCRIPTION
    SUG. RETAIL
    P ART  #
    DESCRIPTION
    SUG. RETAIL
    1022-0054
    Single channel
    $452.00
    1022-0110
    Dual channel
    $622.00